Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Come aboard this well-maintained 45-year-old beauty!
The experience of this boat from the moment you step on is exactly what Bill Shaw and Pearson designed this boat for! The everlasting effect of being through the seas!
When you step aboard, you’ll see the precision craftsmanship of this boat, from the bow to the stern, and everything in between! The rigging and sails have been maintained and replaced as needed! The headsail was replaced in 2015, and the mainsail is still in good condition!
The head was replaced in 2016.
The 50W solar panel helps stay offshore, as the power this boat gets and utilizes is top-notch! With an auto-charging source, A Vitron 75/15 Mppt Controller, you have all you need!
There is plenty of room inside for you to catch some ZzZs, as well! After a long day on the water, you and your friends have all the spots needed to rest and recover!
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
The 10M came with several different engine installations. Most were powered by the Atomic Four gas engine. Diesels were optional with a Faryman 25hp in 75, a Westerbeake 20hp diesel in 76. the Faryman again in 77, and a Volvo 23hp (MD11) from 78-80.
Available with a taller rig:
I(IG): 46.00’ / 14.02m
J: 14.20’ / 4.33m
P: 40.50’ / 12.34m
E: 11.00’ / 3.35m
SA %100: 549.35 sq.ft. /51.03m2
This listing is presented by PopYachts.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.