Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
This boat is in great condition. New Elliott Pattison sails in 2020. Main with two reefing points, jib & storm jib. Includes a 2010 galvanized Pacific trailer & a 2010 2hp Honda outboard, both in great condition. I/we have spent may nights on this boat. I have made a folding screen, which replaces the companionway boards to keep the bugs out. She has a lovely compass & a depth sounder with an alarm. I have installed a small deep cycle battery & a socket array with a voltmeter to charge a cell phone, other electronic devices, the depth sounder & the compass light. She comes with a 10 watt solar charging panel, which has proven sufficient to keep the battery up. She is bottom painted with Interlux Aqua One. Since I have the facility to lift the boat & remove the centerboard, I coated it with Interprotect 2000E epoxy, then 3 coats of Aqua One & re- installed it with a new pendant line. I have replaced the cabin windows, the tiller, installed a telescoping tiller extension & a transom boarding ladder. She comes with an anchor with 6 feet of chain & 100 feet of 1/2 anchor rode & a whisker pole.
Equipment: Listed in the description.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.