Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
This is a great deal on a good boat. I am selling it cheap because I have to move out of state for my job. It has a fresh coat of bottom paint and it’s ready to splash. It’s not perfect and there are plenty of small things that could use some TLC. The bimini needs restitching and the radar & autohelm need to be figured out. But the engine runs well and it has a nice set of sails from 2019 that have seen very little use. First cash in hand takes it.
Equipment: LWL: 23’9” Mast height from waterline: 41’3” Headroom: 6’2” Sail area: 398 sq. ft. Jiffy reefing Self-tailing winches Swim ladder 27 gallon fresh water tank 11.5 gallon fuel tank Two burner countertop alcohol stove VHF Radio Electric Bilge Pump No head sink Kenyon boom & reefing system Danforth Corsair II compass Barient self-tailing winches Uniden President LTD 715 VHF marine radio Schaefer roller furler Raytheon AutoHelm AH800 HSB Series Pathfinder radar Bimini included Yard trailer included (not highway capable) Solar panel included, but not currently mounted Additional anchor & rode included Hatch screen Origo 4000 alcohol stove 3 mainsails, 2 jibs, 1 spinnaker Spinnaker pole & rigging 16 hp Yanmar 2GM20F diesel engine
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Shoal draft/wing keel: 4’/1.21m
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.