©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Very solid C&C 35-1 available for sale (or possible charter) to a buyer interested in racing the C&C 35 one-design class (strongest keelboat class on Lake St. Clair). We also have a large class for the BYC Mackinac Race.
Boat is in very good, original shape. No soft spots, solid bulkheads, solid mast step. New primary winches. Everything you need to get out racing.
Atomic IV engine, folding new Martec folding prop.
I’m open to terms or arrangements that will get this boat out sailing regularly. I will help get you up to speed.
Equipment: Main 155 % Genoa 135 % Genoa 110 % Genoa .75oz Spinnaker 1.5oz Spinnaker
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
First called the REDWING 35 and built by Hinterhoeller Ltd. a development of the INVADER 35. It was renamed the C&C 35 when Hinterhoeller was merged with C&C Yachts.
In 1973 a re-designed model was introduced, later designated the C&C 35-2. (or Mk II). In all, 351 C&C 35s were built. Production for the C&C 35-2 ended in 1975.
Differences between the 2 versions:
The nearly one foot increase in length of the Mk II is a result of raising the sheer several inches. In addition, the scimitar-shaped rudder of the MkI was replaced with a more conventional, partially balanced spade. The after sections of the MkII were reshaped to reflect the then-current IOR design trends, sail area was increased by a little over 50 square feet and an additional 620 pounds of ballast were added.
The deck and cabin house of the MkII were also modified eliminating the integral spray rail on the cabin top that was a prominent feature on the MkI. The cockpit was changed to a “T” configuration, and a bridge deck added for the mainsheet. The interior was spruced up to make it a little more yacht-like in appearance and, last but not least, all these changes resulted in a 30 % increase in displacement to 13,800 pounds, and draft increased from 5’ 3” to 5’ 6”.
Construction of the 35 is a solid glass hull with balsa cored deck.
The interior is similar between the MKI and MKII models. The galley and navigation station are flip-flopped on the two models with the MKI having a starboard side galley aft and a port side quarter berth/navigation station combination. Both models have a fiberglass cabin sole and minimal bilge area.
The Universal Atomic 4 gas engine was the standard auxiliary power for both models. Some of the later MkII models were offered with Westerbeke diesel engines.
From 1983 to 1987 C&C built another 35 model, referred to here as the C&C 35 MKIII, which is an entirely different design.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.