Seller's Description
Standard features
Contact Donald at FourFourZero-NineThreeFive-FiveThreeSixZero
Boat is located in Sandusky, Ohio.
1976 Southern Cross Masthead Rig.
Milanooka is a documented vessel now sitting in a heated indoor Marina in Sandusky, Ohio. Millie is a sound, well equipped vessel ready to set sail.
As a factory finished boat she has an original gel coat white hull with ivory topsides.
I am currently the third owner, having purchased her in 1999.
Since my ownership I have traveled approximately 25,000 miles into the Great Lakes, the river systems to the Gulf Coast, East and West coasts of Florida, the Bahamas, and as far north as Newport Harbour.
The previous owner traveled down through the Caribbean to the east coast of South America.
Millie has proven to be a well constructed, reliable and safe vessel.
1 Head, 1 Cabin.
Garmin Chart plotter/Depth sounder 2022.
New 12V wiring throughout vessel 2022.
New Garmin Chart plotter/Depth sounder 2022.
2 gel filled batteries.
1 gel filled engine start battery.
Bat-mon battery monitor.
2 VHF radios-one ship, one hand held.
Raytheon radar.
C.A.R.D.
Collision Avoidance Radar.
406MHz EPIRB.
Owner is motivated to sell.
Best offer might be negotiated.
Too many upgrades and equipment to list.
Please reach out to the owner for all the details.
Don Carroll.
440-935-5360 OR email at
c.marie.brill@gmail.com
www.boatblast.net/114148/Southern-Cross-Masthead-Rig-Sandusky-Ohio
Specs
- Designer
- Thomas Gillmer
- Builder
- C. E. Ryder
- Associations
- ?
- # Built
- 150
- Hull
- Monohull
- Keel
- Long
- Rudder
- Transom hung
- Construction
- FG
Dimensions
- Length Overall
- 31′ 0″ / 9.5 m
- Waterline Length
- 25′ 0″ / 7.6 m
- Beam
- 9′ 6″ / 2.9 m
- Draft
- 4′ 7″ / 1.4 m
- Displacement
- 13,600 lb / 6,169 kg
- Ballast
- 4,400 lb / 1,995 kg
Rig and Sails
- Type
- Cutter
- Reported Sail Area
- 496′² / 46.1 m²
- Total Sail Area
- 495′² / 46 m²
Mainsail
- Sail Area
- 213′² / 19.8 m²
- P
- 31′ 5″ / 9.6 m
- E
- 13′ 5″ / 4.1 m
- Air Draft
- ?
Foresail
- Sail Area
- 283′² / 26.3 m²
- I
- 36′ 6″ / 11.1 m
- J
- 15′ 5″ / 4.7 m
- Forestay Length
- 39′ 7″ / 12.1 m
Auxilary Power
- Make
- ?
- Model
- ?
- HP
- ?
- Fuel Type
- ?
- Fuel Capacity
- ?
- Engine Hours
- ?
Accomodations
- Water Capacity
- ?
- Holding Tank Capacity
- ?
- Headroom
- ?
- Cabins
- ?
Calculations
- Hull Speed
-
6.5 kn
Classic: 6.7 kn
Hull Speed
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Formula
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
- Sail Area/Displacement
-
13.9
<16: under powered
Sail Area / Displacement Ratio
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
Formula
SA/D = SA ÷ (D ÷ 64)2/3
- SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
- D: Displacement in pounds.
- Ballast/Displacement
-
32.3
<40: less stiff, less powerful
Ballast / Displacement Ratio
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Formula
Ballast / Displacement * 100
- Displacement/Length
-
388.6
300-400: heavy
Displacement / Length Ratio
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
Formula
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
- D: Displacement of the boat in pounds.
- LWL: Waterline length in feet
- Comfort Ratio
-
38.8
30-40: moderate bluewater cruising boat
Comfort Ratio
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Formula
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
- D: Displacement of the boat in pounds
- LWL: Waterline length in feet
- LOA: Length overall in feet
- Beam: Width of boat at the widest point in feet
- Capsize Screening
-
1.6
<2.0: better suited for ocean passages
Capsize Screening Formula
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
Formula
CSV = Beam ÷ ³√(D / 64)
- Beam: Width of boat at the widest point in feet
- D: Displacement of the boat in pounds
Notes
From BlueWaterBoats.org:
The Southern Cross 31 is a no nonsense double-ender designed by Tom Gillmer, a professor of naval architecture at the US Naval Academy. The design takes influence from shapes dating back to Colin Archer’s work nearly a century earlier, and the hull in many respects is similar the straight transomed Allied Seawind 30, an earlier Gillmer creation notable for being the first fiberglass boat to circumnavigate the globe. (The Allied Seawind 30 was successful enough to be updated to the Allied Seawind II)
She’s a full keeled sailboat with an outboard rudder and tiller combo, a configuration often praised for its simplicity and the cockpit is quite small, suitable for ocean passages. The cutter rig with bowsprit has 447 sq. ft. of canvas, plenty for its displacement, but being a heavy displacement boat performance is hampered in light airs. Looking on the bright side, the weight gains dividends with a comfortable motion while underway.
Two interior layouts were offered, one with a stand up navigation station over a large locker and one with quarter-berth. The overall construction quality was of a good standard, suitably strong for offshore work. The hulls were built in fiberglass with the topsides cored in Airex foam, while the deck and cabin house was cored in balsa.
In total 130 boats were built between 1976 and 1987, of which a number were sold as hull and deck kits. A slightly larger and similar Gillmer design is the Aries 32 (around 20 of these were built).
Links, References and Further Reading
» Southern Cross Owners Association
» Twenty Small Sailboats to Take You Anywhere by John Vigor, (Ch19, p117-123) an in depth look at the Southern Cross 31. ISBN:978-0939837328
» Ryder Yachts
This listing is presented by SailboatOwners.com. Visit their website for more information or to contact the seller.
