Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
“Box of Rain” Well cared for Hunter Cherubini. Great running diesel with 2024 diesel poly tank. Autohelm. Wheel steering. Raymarine C120. Owned for 11 years and did a refit 7 years ago. All new running gear including transmission. $2000 Price Drop April 2025 Hauled Nov. of 2024 for paint. In the water now. Turn key. Quantum sails good condition but the jib will need replaced but a perfect spare. Serviceable as is.
Equipment: Coast Guard Package. Raymarine C120 plotter with SiriusXM weather (subscription). VHF with masthead antenna. New lifelines 2022. Bomar hatches / All Lewmar Ports replaced. Diesel jerry can. (Water jugs are for illustration only.) Dometic head is odorless. Ready to plumb with a marine head if desired (and as was original) and through hull discharge and deck waste fill.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Shoal draft/wing keel: 3.25’, Disp. 7200 lbs.
Later boats were available with Yanmar diesel.
Tall Rig:
I: 37.50’/11.43m
J: 11.30’/3.44m
P: 32.30’/9.85m
E: 9.30’/2.83m
Total (100%): 362 ft2/33.63m2
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.