Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Well maintained sailboat, reliable and easy to sail alone. Has an Universal 25MP engine and a list of full equip bellow
Equipment: CDI Flexible furler, Harken #900ST Unipower electric 2-speed , Navy blue Sunbrella dodger and bimini in very good/like new condition, Sails: Doyle square weave Dacron mainsail and RF genoa in very good condition , 25lb. Mantus plow w/20 5/16 chain and 200 5/8 multi-strand nylon rode, Standard VHF, G.P.S. Garmin GPSmap 740s touch screen chartplotter, Garmin tathometer:GMI 20 multi display w/hull triducer, Wind Inst.: 2021 Garmin GMI 20 multi display w/masthead transducer, SpeedLog: New Garmin GMI 20 multi display w/hull traducer, Autopilot: Raymarine p70 control head and wheel pilot, Stove: GSI S/S 2-burner w/oven, gimbaled, good, 2 stationary 100amp batteries, 2 solar power panels, canvas winter cover
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
(1986-1991)
Among changes were ‘T’ cockpit, slightly different deck and liner, and different Engine options.
A wing keel version was available,(hull #500+) as was a tall rig.
Wing keel:
DRAFT: 1.17m/3.83’.
BALLAST: 4300lbs/1950kg
DISPLACEMENT: 10,300lbs/4672kg
TALL RIG:
I: 43.00’/13.11m
J: 13.16’/4.01m
P: 37.00’/11.28m
E: 12.00’/3.66m
Sail Area(100%): 504.94 ft2/46.91 m2
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.