Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
2007 FT10 “Tiger” for sale
This boat was sailed regularly until a few years ago when the owner moved abroad. Its time to get this into someones hands for a good deal.
The good:
Tons of sails, all the oem plus a code zero, reacher, #1, and main. All low hours but a few years old. All sails are Pryde. Theres probably a few more im forgetting.
Betts Rudder, lots of nexus stuff, including maxi displays on mast and several in cockpit. Motor ran when parked. All oem equipment goes with the boat. also included is an emergency rudder and tiller setup for distance racing.
The trailer is a west coast aluminum trailer, complete with spare tire and hub assembly
The Bad
The betts rudder is missing the tiller, the oem cassette is cracking.
The running rigging is all high tech, but is probably near the end of its life. The standing rigging is fine, and has been stored inside the boat.
The Ugly
The clear coat on mast and hull is starting to go and will need to be addressed, the boat has been sitting, and will need some love to get it to sparkle again.
The area on the bow is not from collision, its the clear coat starting to peel. This boat has not been in any big collisions.
The boat is located at Unbridled Sailing in Louisville, we are close to the airport for anyone wanting to see it, and can even help with transportaion. The boat was sailed regularly until it got laid up, so all the FT10 bugs have been chased out. Offers encouraged, we would like to get it moved soon.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
This listing is presented by SailingAnarchy.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.