Seller's Description
Sea Pearl 21, 2018 LOA 21’ 0” LWL 19’ 0” Beam 5’ 6” Draft (board up) 6” Draft (board down) 2’ 6” Trailer weight 600 lbs approx Sail area 160 sq ft Aft cockpit 6’ 6” Center cockpit 10’ 0” Mast height above waterline 19’ 6”
Unstayed Cat-Ketch rig Water ballast system adds 350 lbs Aluminum trailer by Continental Leeboards Rudder and leeboards kick up Canvas cover for main cockpit Boat cover for winter storage Teak rail Barrier coat epoxy bottom Helmsman teak seat back with storage box Tiller extension Motor bracket on port side Torqeedo 1003 electric motor with long shaft is available for sale
She is a beautiful boat that sails very well. Really, it takes only 10-15 minutes to rig. Place the masts in the slots, attach booms, and unfurl sails. Sadly, events force the sale of this beautiful daysailer. She is located in Des Moines, Iowa or phone 515-229-5242
Specs
- Designer
- L. Francis Herreshoff
- Builder
- Marine Concepts
- Association
- Marine Concepts (USA)
- # Built
- 415
- Hull
- Monohull
- Keel
- Centerboard
- Rudder
- ?
- Construction
- FG
Dimensions
- Length Overall
- 20′ 11″ / 6.4 m
- Waterline Length
- 18′ 11″ / 5.8 m
- Beam
- 5′ 6″ / 1.7 m
- Draft
- 0′ 5″ / 0.2 m — 2′ 5″ / 0.8 m
- Displacement
- 600 lb / 272 kg
- Ballast
- ?
Rig and Sails
- Type
- Cat-Ketch
- Reported Sail Area
- 136′² / 12.6 m²
- Total Sail Area
- ?
Mainsail
- Sail Area
- ?
- P
- ?
- E
- ?
- Air Draft
- ?
Foresail
- Sail Area
- ?
- I
- ?
- J
- ?
- Forestay Length
- ?
Auxilary Power
- Make
- ?
- Model
- ?
- HP
- ?
- Fuel Type
- ?
- Fuel Capacity
- ?
- Engine Hours
- ?
Accomodations
- Water Capacity
- ?
- Holding Tank Capacity
- ?
- Headroom
- ?
- Cabins
- ?
Calculations
- Hull Speed
-
11.5 kn
Classic: 5.84 kn
Hull Speed
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Formula
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
- Sail Area/Displacement
-
30.6
>20: high performance
Sail Area / Displacement Ratio
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
Formula
SA/D = SA ÷ (D ÷ 64)2/3
- SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
- D: Displacement in pounds.
- Ballast/Displacement
- ?
Ballast / Displacement Ratio
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Formula
Ballast / Displacement * 100
- Displacement/Length
-
39.1
<100: Ultralight
Displacement / Length Ratio
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
Formula
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
- D: Displacement of the boat in pounds.
- LWL: Waterline length in feet
- Comfort Ratio
-
4.8
<20: lightweight racing boat
Comfort Ratio
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Formula
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
- D: Displacement of the boat in pounds
- LWL: Waterline length in feet
- LOA: Length overall in feet
- Beam: Width of boat at the widest point in feet
- Capsize Screening
-
2.6
>2.0: better suited for coastal cruising
Capsize Screening Formula
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
Formula
CSV = Beam ÷ ³√(D / 64)
- Beam: Width of boat at the widest point in feet
- D: Displacement of the boat in pounds
Notes
Based on the Herreshoff ‘Carpenter’ class.
This listing is presented by SailingTexas.com. Visit their website for more information or to contact the seller.
