Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
This is a well made boat with the highest quality parts using both traditional fittings with modern running components. Fiberglass hull with shallow draft, draws under 2’ with centerboard up, 3.5’ down. Fitted with mahogany trim topside and down below with teak decks. This boat is in very good condition. Helm is beautifully balanced. 1 main with 2 single line reefs in the boom and 1 jib with roller furling. The Tadorne is a swift and safe vessel that will turn heads. Engine runs great. Comfortably accommodates 6 passengers. The atmosphere down below in the cabin is warm and inviting. Her highly functional mahogany fittings have been built by skilled woodworkers and finished with a satin varnish. The bunks on either side and forwards are covered with an attractive canvas which matches the color of the hull. There is a stove built into a shelf to port and a stainless steel sink with pressurized water to starboard. Underneath the forward bunk there is a marine toilet. Title is clear for boat and trailer. Ready to sail.
Equipment: Yanmar 2GM20 Raytheon ST 1000 auto pilot Tandem axel trailer (can be launched from boat ramp) Raytheon ST 60 wind display Raytheon ST 60 speed/depth Dutchman mainsail Furling Jib Lewmar winches Stainless swim ladder Sony radio Alcohol stove (never used) Sink (never used) Toilet (never used) Self draining cockpit
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.