# C&C 32

1981
Designer
C&C Design
Builder
C&C Yachts
Associations
?
# Built
?
Hull
Monohull
Keel
Fin
Rudder
Construction
FG

### Dimensions

Length Overall
31 5 / 9.6 m
Waterline Length
24 8 / 7.5 m
Beam
10 2 / 3.1 m
Draft
5 8 / 1.7 m
Displacement
9,680 lb / 4,391 kg
Ballast
3,900 lb / 1,769 kg (Lead)

### Rig and Sails

Type
Sloop
Reported Sail Area
462′² / 42.9 m²
Total Sail Area
462′² / 42.9 m²
Sail Area
200′² / 18.6 m²
P
35 2 / 10.7 m
E
11 3 / 3.5 m
Air Draft
44 8 / 13.6 m
Sail Area
262′² / 24.4 m²
I
41 1 / 12.5 m
J
12 9 / 3.9 m
Forestay Length
43 0 / 13.1 m

Make
Universal
Model
Atomic 4
HP
30
Fuel Type
Gas
Fuel Capacity
20 gal / 76 l

### Accomodations

Water Capacity
30 gal / 114 l
Holding Tank Capacity
?
?
Cabins
?

Hull Speed
7.1 kn
Classic: 6.66 kn

### Hull Speed

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Formula

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL

7.05 knots
Classic formula: 6.66 knots
Sail Area/Displacement
16.3
16-20: good performance

### Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

Formula

SA/D = SA ÷ (D ÷ 64)2/3

• SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D: Displacement in pounds.
16.27
<16: under powered
16-20: good performance
>20: high performance
Ballast/Displacement
40.3
>40: stiffer, more powerful

### Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Formula

Ballast / Displacement * 100

40.29
<40: less stiff, less powerful
>40: stiffer, more powerful
Displacement/Length
287.8
275-350: heavy

### Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

Formula

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet
287.77
<100: ultralight
100-200: light
200-300: moderate
300-400: heavy
>400: very heavy
Comfort Ratio
25.1
20-30: coastal cruiser

### Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Formula

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)

• D: Displacement of the boat in pounds
• LWL: Waterline length in feet
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet
25.1
<20: lightweight racing boat
20-30: coastal cruiser
30-40: moderate bluewater cruising boat
40-50: heavy bluewater boat
>50: extremely heavy bluewater boat
Capsize Screening
1.9
<2.0: better suited for ocean passages

### Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

Formula

CSV = Beam ÷ ³√(D / 64)

• Beam: Width of boat at the widest point in feet
• D: Displacement of the boat in pounds
1.92
<2: better suited for ocean passages
>2: better suited for coastal cruising

### Notes

Yanmar 2GM Diesel was available as an option.

Keel/CB version:
Draft (BD): 6.90’/2.10m
Draft (BU): 4.00’/1.22m
Displacement: 10485 lbs./4756 kgs.
Ballast: 4705 lbs./2134 kgs.

### For Sale

Have a sailboat to sell?