1997 Pacific Seacraft Ericson 333

Salem, Massachusetts, United States
$42,500 USD

This Bruce King design is an excellent family racer/cruiser featuring two separate staterooms, a luxurious main salon, enclosed head, combination ice box/chart table/ nav station and spacious galley. She is hand built with meticulous detail and outstanding joiner work from the master craftsmen at Pacific Seacraft.
The 333 is set up on deck with all controls led aft to the cockpit and features a complete complement of Harken deck hardware. For family fun, a swim platform is molded into the transom making the cockpit a great outdoor patio at anchor. All of this is complimentary to her outstanding sailing performance. With her balanced helm and sensibly proportioned hull shape, she tracks easily, tacks effortlessly and is quick upwind and downwind.
SCOOP TRANSOM 2 PRIVATE CABINS

Equipment:
Pacific Seacraft quality joinerwork throughout
Mostly satin finish teak
2 Private cabins
Lge owners cabin aft
Lge head w/ electric flush toilet
shower space
Nav station over refridgerator
Pacific Seacraft distribution panel
Adler Barbour coldplate
Salon w/ centerline table and setees port and starboard
storage outboard and below
forward cabin w/ v berth.
6'3" headroom with soft ceiling liner w/ zippers
2 burner propane stove and oven
Dbl STS sinks on center
H/C pressure water
FW foot pump
Raw water foot pump
Ample storage out board and below
Sails and Rigging
Aluminum mast and boom
S.S. wire rigging
SS turnbuckles/ fittings 2019
Harken roller furling system
Internal halyards new 2015
Bluewater 7 oz full batten main w/ lazy jacks
Sail cover
130% genoa
Rigid boom vang rope controlled
Dodger2015
all canvas dark green
Cockpit awning
Harken #42 2SP ST primary winches
Harken# 8 chromed winches cabin top
Single Handers Package with both Halyards & 2 sets single line reefing led aft to cockpit
Raymarine Radar
Ray GPS/Depth/Knotmeter
Autohelm 4000 autopilot
older B & G Network series instruments
Data repeater is at nav station
Garmin Hand Held GPS
Uniden Hand held VHF
Jepsen Stereo
ICOM vhf radio w/ antenna
Ritchie compass
Additional Information
Danforth SS anchor, chain, rode
2nd Danforth anchor galvanized
Ultra Pump switch Jr. manual and/or electric bilge pump
cockpit table
cockpit cushions
emergency tiller
two tone deck with contrasting non skid
Adler/Barbour DC Refrigeration system
Push button positive catches on locker doors
transom swim platform with locking swim ladder
transom barbeque
Yanmar 30 GM30F fresh water cooled diesel 27HP
55 amp alternator
Whitlock Cobra single lever rack and pinion steering system
Dripless stuffing box 2016
Maxiprop 2 blade feathering prop

Interested In This Boat?

Have questions? Interested in seeing it?

This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.

View on SailboatListings.com

About the Pacific Seacraft 31

Designer
William Crealock
Builder
Pacific Seacraft
Associations
?
# Built
100
Hull Type
Fin with rudder on skeg
Construction
FG

Dimensions

Length Overall
31 9 / 9.7 m
Length On Deck
30 6 / 9.3 m
Waterline Length
24 1 / 7.4 m
Beam
9 10 / 3 m
Draft
4 0 / 1.2 m 4 11 / 1.5 m
Displacement
11,000 lbs / 4,990 kg
Ballast
4,400 lbs / 1,995 kg (Lead)

Rig and Sails

Type
Cutter
Reported Sail Area
487 ft2 / 45.2 m2
Total Sail Area
487 ft2 / 45.2 m2
Mainsail
Sail Area
204.4 ft2 / 19 m2
P
32 6 / 9.9 m
E
12 6 / 3.8 m
Mast Height
?
Foresail
Sail Area
282.6 ft2 / 26.3 m2
I
38 8 / 11.8 m
J
14 7 / 4.5 m
Forestay Length
41 4 / 12.6 m

Auxilary Power

Make
Yanmar
Model
3GM30F
HP
30
Fuel Type
Diesel
Fuel Capacity
30 gal / 114 l

Accomodations

Water Capacity
65 gal / 246 l
Holding Tank Capacity
?
Headroom
6 0 / 1.9 m

Calculations

Hull Speed
6.59 knots
Sail Area/Displacement
15.75
under powered
Ballast/Displacement
42.73
stiffer, more powerful
Displacement/Length
348.22
heavy
Comfort Ratio
30.39
moderate bluewater cruising boat
Capsize Screening
1.77
better suited for ocean passages

Notes

From BlueWaterBoats.org:

Not to be mistaken for Pacific Seacraft’s earlier 1977 full-keeled Mariah 31, the Pacific Seacraft 31 introduced in 1987 shares its heritage with the celebrated Crealock 37 which earned a spot on the American Sailboat Hall of Fame for its seaworthiness and build quality. The diminutive 31 foot design encapsulates the same concepts of comfort and safety but in packs it into a much smaller package. It’s a pricey boat given her size, but you can expect Pacific Seacraft’s usual high build quality. Overall she’s proven to be a surprisingly roomy boat, easily handled and well suited to couples.

History

To describe the history of the Pacific Seacraft 31 we need to go back a few years to 1980 when Pacific Seacraft acquired the molds for a boat called the Crealock 37, the previous owner, Cruising Consultants, had built a few boats before going bankrupt. The Crealock 37 was designed by Bill Crealock, and over time it garnered such a reputation that it entered the Sailboat Hall of Fame. By the early 1980s Pacific Seacraft recognized the need for a smaller version and Crealock was approached to design the smaller sibling along the same concepts of the 37. This smaller boat was launched in 1984 as the Pacific Seacraft 34.

In 1987, an even smaller 31 foot version was introduced to fill out the range. This boat, also designed by Crealock, became the Pacific Seacraft 31 and it enjoyed an initial twelve year production span between 1987 and 1999 with 79 hulls produced. In 2002 production was restarted after Pacific Seacraft continued to get numerous customer request for a smaller boat. Total production stands at some number over 100 boats thus far.

Configuration & Layout

The Pacific Seacraft 31 differs from the larger boats in the range in that it makes a departure from the traditional double ender styling in favor of a near vertical transom which opens up more space in the aft sections. The long cruising fin, bustle and skeg hung rudder is still there and above deck a cutter rig is retained, though there is an option for a simpler though less ocean-going sloop rig.

There is a shoal draft version which features a Scheel keel drawing 4′ over the standard 4′ 11″. The patented Scheel keel is said to reduced leeway and improve tracking over a standard shoal draft fin. Other variations include tiller steering found in earlier boats, later boats offered Edson rack-and-pinion steering.

On deck is a relatively large cabin truck with lots of portlights. The cabin top is flat featuring a large forward two-way hatch as well as twin dorade vents. Further back in the cockpit are seats that are 7 feet long with contoured backs; three lockers are below the seats, there’s also a vented gas locked on the starboard coming. The helmsman also has a contoured seat.

Down below the boat has a very open feel which is usually the domain of much larger vessels. The V-berth is 6′ 6″ in length with plenty of storage alongside the hull, as well as above and below the berths. A curtain separates the V-berth from the main saloon. In the saloon are twin settees either side of the table which seats six comfortably and attaches to the compression post. The table can be stowed away completely beneath the V-berth.

Further back on port is the galley with its two burner stove and twin sinks, unfortunately both are a decent distance from the boat’s centerline . Opposite on starboard is a standup nav-station. There’s also a seagoing double berth on the port quarter which can be access by climbing through behind the galley.

The engine is located in the usual location below the companionway stairs which forms an engine cover, there is very good access from all sides to the engine and the stuffing box is very easy to reach.

Construction

The hull is laid up by hand in solid fiberglass and water resisting vinylester resin is used on the outermost layer and isophthalic polyester resin in the layers below. This combo should provide excellent resistance to osmosis. Some articles document the hull being hand-laid with vinylester resin throughout with kevlar fiber reinforcing which provides excellent toughness; this may be true for later boats.

Lead is used for ballast. The fiberglass rudder has internal reinforcing from a steel plate and mounted to the fiberglass skeg which itself is reinforced with steel. The pivot is bronze.

The deck is made of marine plywood sandwiched between GRP on both sides with a non-skid pattern molded on the top. The hull-to-deck join is glued and is solidly through-bolted with 1/4 inch stainless bolts every four inches.

The interior is built from a single full-length molded pan bonded to the interior of the hull. It’s a method that’s consistent with many modern production boats, cheaper to build with advantages in increased hull stiffness, reducing creaks and groans but has the sacrifice of accessibility to all areas of the hull.

Under Sail

The boat with its long cruising fin and skeg-hung rudder tracks well. The best point of sail is beam or broad reach, however it’s not particularly close-winded with boat speed dropping off quickly with apparent wind angles of less than 40 degrees. Overall the boat is well balanced and is easily sailed short handed.

Buyers Notes

There are no reported weaknesses for this boat, in general Pacific Seacraft build very strong purpose-driven boats. Most problems that have been reported have resulted in owner neglect and to a lesser degree age. Prices have remained high reflecting buyer demand.

As of 2010 the asking price is in the range of:
1987-1999 $90k – $110k USD
2003-2007 $155k – $180k USD

» Pacific Seacraft 31 info at the official Pacific Seacraft website.
» Twenty Affordable Sailboats to Take You Anywhere by Gregg Nestor (Ch 16. p145-p152) ISBN:978-0939837724
» Blue Water Sailing Magazine, Jan 2005, review of the Pacific Seacraft 31 by Greg Jones.
» Latitudes and Attitudes Seafaring Magazine, Feb 2009.

Similar Sailboats For Sale

Subscribe

Get occassional updates about new features or featured sailboats.
You can opt out or contact us any time.