Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
This head-turning, classic sailboat designed by legendary American yacht designer Nathanael Herreshoff is a pure delight to own and sail. Lovingly and skillfully rebuilt in 2008 with all new teak seats, combings and toe rails. This daysailer moves beautifully in light air while easily handling strong blustery winds and choppy seas thanks to her 750 lb. lead keel. Generous cockpit comfortably fits 4 adults while boat can also be easily single-handed with her self-tending jib. This gorgeous classic boat is a perennial favorite throughout New England and a delightful and rare sight in the Chesapeake Bay. Ask about slip and storage options in beautiful sailing area just south of Annapolis, Maryland.
Equipment: 2012 2hp Honda outboard motor. Mainsail- very good condition Working jib- recent and in excellent condition- with varnished spruce self-tacking jib boom Total sail area 140 sq. ft.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Originally designed and built by Nat Herreshoff of wood in 1914 and called the HERRESHOFF BULL’S EYE. In 1938 she was modified with an above transom tiller, and named The FISHERS ISLAND SOUND BULL’S EYE.
In 1947 the rights to the design were purchased by Cape Cod Shipbuilding Co.
In 1949 a fiberglass version of the FISHERS ISLAND SOUND BULL’S EYE was introduced (overseen by Sidney Herreshoff) that also featured a cuddy cabin and modern marconi rig on an aluminum spar. This became the THE CAPE COD BULL’S EYE. (pictured here)
Throughout the evolution of different decks and rigs, the hull design has remained unchanged from the original first built at Herreshoff Mfg. Co.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.