Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Located in Ponce Inlet, Florida Presently having a brand new bottom paint job done. 37 foot Fiberglass Alan Vaitses Herreshoff Meadowlark built in mattapoisette, MA by Newengland Boat works. Powered by a 30 hp Diesel westerbeke inboard, Bronze type II skipper head, solid fiberglass hull, new aluminum fuel tanks 50 gallon capacity, 30 gallon water tank, aluminum masts, encapsulated lead keel, all paint below the water line refurbished 4 years ago from bare fiberglass with Interlux products. With her leeboards up she draws 2 feet perfect for hiding in Florida mangroves or skipping over sandbars. With her short 36 foot masts hiding from hurricanes or slipping under fixed bridges is easy. Her masts are on tabernacles for simple removal if need be. Propane Gas stove and hot water. heater. Email for showing.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
The HERRESHOFF 15, BUZZARDS BAY 15, and the WATCH HILL 15 are similar. The drawing here shows the ‘modernized rig’ (devised by Sidney Herreshoff?), adopted for a few years beginning in the early 1930’s.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.