Seller's Description
The owner bought this boat in 2005
General condition and any additional information
This very seaworthy boat is much appreciated for its classic design. She is a simple, pleasant sail also for solo and will take care of you in any weather. A good wash and she is ready to sail .
Standard features
Tall rig - Bill Tripp design Inboard-outboard Yamaha 15 HP 4 stroke gas engine ( completely isolated aft compartment ) Tiller steering Origo stove 110V fridge ( needs repair ) 110 V electric space heater
Extra gear included
home-made rowing dinghy Hard dodger and hard Bimini( can be removed )
Improvements to the hull, deck, rigging, engine, or interior
2007 engine 2007 sails, rigging 2019 GPS and VHF LED lights
Specs
- Designer
- William H. Tripp Jr.
- Builder
- Seafarer Yachts
- Associations
- ?
- # Built
- 30
- Hull
- Monohull
- Keel
- Fin
- Rudder
- ?
- Construction
- FG (solid laminate)
Dimensions
- Length Overall
- 30′ 3″ / 9.2 m
- Waterline Length
- 20′ 0″ / 6.1 m
- Beam
- 8′ 5″ / 2.6 m
- Draft
- 4′ 5″ / 1.4 m
- Displacement
- 9,600 lb / 4,354 kg
- Ballast
- 2,900 lb / 1,315 kg (Lead)
Rig and Sails
- Type
- Sloop
- Reported Sail Area
- 369′² / 34.3 m²
- Total Sail Area
- ?
Mainsail
- Sail Area
- ?
- P
- ?
- E
- ?
- Air Draft
- ?
Foresail
- Sail Area
- ?
- I
- ?
- J
- ?
- Forestay Length
- ?
Auxilary Power
- Make
- Universal
- Model
- Atomic 4
- HP
- 30
- Fuel Type
- Gas
- Fuel Capacity
- 20 gal / 76 l
- Engine Hours
- ?
Accomodations
- Water Capacity
- 30 gal / 114 l
- Holding Tank Capacity
- ?
- Headroom
- ?
- Cabins
- ?
Calculations
- Hull Speed
-
5.2 kn
Classic: 5.99 kn
Hull Speed
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Formula
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
- Sail Area/Displacement
-
13.1
<16: under powered
Sail Area / Displacement Ratio
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
Formula
SA/D = SA ÷ (D ÷ 64)2/3
- SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
- D: Displacement in pounds.
- Ballast/Displacement
-
30.2
<40: less stiff, less powerful
Ballast / Displacement Ratio
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Formula
Ballast / Displacement * 100
- Displacement/Length
-
534.6
>400: very heavy
Displacement / Length Ratio
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
Formula
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
- D: Displacement of the boat in pounds.
- LWL: Waterline length in feet
- Comfort Ratio
-
36.9
30-40: moderate bluewater cruising boat
Comfort Ratio
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Formula
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
- D: Displacement of the boat in pounds
- LWL: Waterline length in feet
- LOA: Length overall in feet
- Beam: Width of boat at the widest point in feet
- Capsize Screening
-
1.6
<2.0: better suited for ocean passages
Capsize Screening Formula
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
Formula
CSV = Beam ÷ ³√(D / 64)
- Beam: Width of boat at the widest point in feet
- D: Displacement of the boat in pounds
Notes
Imported by, and part of the Seafarer (USA) line.
Available as sloop or yawl. (sitka spruce spars)
Hulls were molded in Europe and some were finished and sold there.
Some time later (1966?) the molds were purchased or leased to a firm in the UK. (Dock Plastics?) and a similar boat was sold as the SANTANDER 30. How many of this later version were built is unknown (to us).
This listing is presented by SailboatOwners.com. Visit their website for more information or to contact the seller.
