Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Price to sell, recently reduced! Slip paid through 4/1/2024. August 2022 survey available upon request.
The Hunter 33 was one of Hunter’s most popular. This 33 is a family cruiser designed to be easy and fun to sail with the furling main and fractional head sail. It has spacious accommodations in a comfortable two stateroom layout. It is bright and light inside. The cockpit seats eight and the interior sleeps six. She has been lightly used and well maintained. It features the Mariner package with a larger engine, folding wheel, and additional electronics.
Equipment: Equipment: 29HP Yanmar Diesel with low hours Raymarine ST60 instruments with Raymarine plotter Autopilot In-Mast Furling Recently replaced mainsail and dodger Refrigerator Anchor AC/Heat Hot Water Heater Propane Stove Microwave
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Dimensions above are with shoal draft and furling mast.
Also available with deep draft keel: 5.5’/1.67m
Deep draft ballast: 3455 lbs./ 1569 kg
Standard rig…
Mast height: 46.58’/ 14.20m
SA: 625 sq ft / 58.1 sq m
P = 36.42’ / 11.10m
E = 13.83’ / 4.22m
Optional 29hp engine
An updated version was introduced in 2012 Also referred to as the E33. Same hull and rig. Larger cockpit, deck layout changed plus a swim platform was added. Displacement = 12,400 lbs / 5624 kg
Thanks to Adam Hunt for the photo of the H33-2.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.