Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

We will occasionally send you relevant updates. You can opt out or contact us any time.
2018
Designer
Judel/Vrolijk & Co.
Builder
Hanse Yachts
Associations
?
# Built
?
Hull
?
Keel
Fin + Bulb
Rudder
Spade
Construction
GRP w/1st layer Vinylester resin and balsa sandwich

Dimensions

Length Overall
51 0 / 15.6 m
Waterline Length
44 5 / 13.5 m
Beam
15 7 / 4.8 m
Draft
7 10 / 2.4 m
Displacement
32,410 lb / 14,700 kg
Ballast
8,930 lb / 4,050 kg (Cast iron)
Drawing of Hanse 508

Rig and Sails

Type
Solent
Reported Sail Area
1,268′² / 117.8 m²
Total Sail Area
1,237′² / 115 m²
Mainsail
Sail Area
607′² / 56.4 m²
P
60 2 / 18.4 m
E
20 2 / 6.2 m
Air Draft
72 4 / 22.1 m
Foresail
Sail Area
630′² / 58.5 m²
I
62 7 / 19.1 m
J
20 1 / 6.1 m
Forestay Length
65 9 / 20.1 m

Auxilary Power

Make
?
Model
?
HP
80
Fuel Type
Diesel; Saildrive
Fuel Capacity
74 gal / 280 l

Accomodations

Water Capacity
166 gal / 630 l
Holding Tank Capacity
?
Headroom
?
Cabins
?

Calculations

Hull Speed
11.3 kn
Classic: 8.93 kn

Hull Speed

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Formula

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL

11.25 knots
Classic formula: 8.93 knots
Sail Area/Displacement
20.0
16-20: good performance

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

Formula

SA/D = SA ÷ (D ÷ 64)2/3

  • SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
  • D: Displacement in pounds.
19.96
<16: under powered
16-20: good performance
>20: high performance
Ballast/Displacement
27.6
<40: less stiff, less powerful

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Formula

Ballast / Displacement * 100

27.55
<40: less stiff, less powerful
>40: stiffer, more powerful
Displacement/Length
165.0
100-200: light

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

Formula

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

  • D: Displacement of the boat in pounds.
  • LWL: Waterline length in feet
165.04
<100: ultralight
100-200: light
200-300: moderate
300-400: heavy
>400: very heavy
Comfort Ratio
27.6
20-30: coastal cruiser

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Formula

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)

  • D: Displacement of the boat in pounds
  • LWL: Waterline length in feet
  • LOA: Length overall in feet
  • Beam: Width of boat at the widest point in feet
27.63
<20: lightweight racing boat
20-30: coastal cruiser
30-40: moderate bluewater cruising boat
40-50: heavy bluewater boat
>50: extremely heavy bluewater boat
Capsize Screening
2.0
<2.0: better suited for ocean passages

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

Formula

CSV = Beam ÷ ³√(D / 64)

  • Beam: Width of boat at the widest point in feet
  • D: Displacement of the boat in pounds
1.96
<2: better suited for ocean passages
>2: better suited for coastal cruising

Notes

Hull length: 14.93m / 49ft
Shallow keel: draft - 1.98m / 6.5ft; displacement - 15,100 kg / 33,290 lbs; ballast - 4,730 kg / 10,428 lbs.
Ballast from test reports. L-keel - Yachting Monthly Feb 2020 and shallow keel - Voile Mag December 2018.

For Sale

Have a sailboat to sell?
List it for free and it will show up here.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

We will occasionally send you relevant updates. You can opt out or contact us any time.
Measurements:

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.