Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
I have a circa 1990 Flying Scot Sailboat in very good condition. Boat comes with the following equipment: BRAND NEW North Sails MAIN (Never Used) BRAND NEW North Sails Jib (Never used) Older main and jib BRAND NEW Mooring Cover BRAND NEW Spinnaker Pole BRAND NEW in Bag Intensity Sails Spinnaker 2 Rudders 2 Tillers New Lines Trailer in good overall condition (tires new before stored, holding air).
Do not make lowball offers. Come see this excellent racing and family sailing boat.
Respond w/ messenger and thank you for looking.
SPECS: Boat weight 850 lb (386 kg) Draft 4.00 ft (1.22 m) Hull monohull Construction fiberglass LOA 19.00 ft (5.79 m) LWL 18.50 ft (5.64 m) Beam 6.75 ft (2.06 m) Rudder(s) transom-mounted rudder Rig type Bermuda rig Mainsail area 138 sq ft (12.8 m2) Jib/genoa area 53 sq ft (4.9 m2) Spinnaker area 200 sq ft (19 m2) Total sail area 191 sq ft (17.7 m2)
Equipment: See above
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.