Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
1986 S2 27 SAILBOAT For sale is an extremely clean S2 27 Sailboat. Gizmo is in great shape and has been sailed in fresh water. The interior provide six foot headroom and has the interior cabin room of some 30 footers. Vberth and settees are forward while the galley and head are aft. Gizmo includes an inboard diesel engine, folding prop, tiller steering and roller furling. It is a perfect cruising boat for a couple but has the performance to challenge larger boats.
Equipment: Specifications: Length 26.6 ft Beam 9.25 ft Displacement 5000 Lbs Draft 4.75 ft
Engine: Yanmar 1GM 9 horsepower diesel - no hour meter Folding prop
Equipment: 2 Primary Lewmar 30 non tailing winches 2 Secondary Lewmar 8 non tailing winches Twist lock whisker pole Spinnaker pole Cabin mounted VHF radio Marine head Alcohol stove not used Built-in cooler in galley (2) 12 volt batteries Selden roller furling Boat has A/C shore power hookup Main sail and tiller covers Knot meter Depth meter
Sails: Main, 155 Genoa, Spinnnaker
Interior: Cushions were recovered six years ago and are in like new shape Racing oriented curtains 1 Quarter berth pulls out to be a double Cabin foldout table stored out of the way against galley. Can be setup in cabin or cockpit
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.