Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
1985 Catalina 30 tall rig
SS bow pulpit Double row lifeline gated at cockpit RF jib by CDI w/ UV cover Anchor, rode and chain Double anchor roller Grab rails on deck 4:1 boom vang Reefing mainsail with cover 6:1 mainsheet 3:1 mainsheet traveler Lewmar #16 self tailing halyard winches on deck 4x rope clutches on deck Lewmar #40 2 speed self tailing sheet winches on coming SS stern rail SS fold down swim ladder Stern rail seats Large bimini top 4:1 backstay adjustment Wheel steering Clipper Duet speed meter Raymrine ST70 autopilot wheel pilot Clipper wind speed and direction meter Ritchie pedestal compass Separate gear and throttle levers Engine control panel -tachometer -fuel gauge -temp gauge -amp gauge -798 hours Large, deep lazaretto storage to port Storage in lazaretto to starboard Manual bilge pump
Vberth w/ overhead opening hatch Removeable foot board Storage below
Hanging locker and storage drawers to starboard
Private head to port -storage in mirrored vanity. Open and roomy -overhead opening hatch -side opening port -SS sink
Main salon -overhead grab rails -open and light -Pioneer MIXTRAX stereo system -Rockford Fosgate speakers -flat screen TV -Sorable table -solid bulkheads
Universal 3 cylinder diesel
Galley to port -double stainless steel sinks -portable AC uit -storage in drawers and under counter
Nav station to starboard -storage below -storage in desk -AC and DC breaker panel -Xantrex True Charge 20
Large quarter berth to aft starboard
She’s clean ready to sail.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
With more than 6000 sold, the Catalina 30 is one of the most successful production sailing yachts in history.
During the long production run of this basic model there were a great number of variations with standard and tall rig configurations, each with a bowsprit option, and also including shoal, wing and deep fin keels.
A MK II version began around hull# 3300 (1986).(T-shaped cockpit is the most notable change)
The Mark III (1994) (walk-thru transom with boarding/swim platform standard though offered as an option on earlier models.)
Aux. power:
The early Yanmar, Universal 5411 and Atomic-4 engines were phased out in favor of the 3-cylinder Universal M-25 diesels during the middle 80s.
SHOAL DRAFT: 4.30’/1.31m
SHOAL DRAFT (WING): 3.83’/1.17m
ALT.RIG DIMENSIONS:
TALL:
I: 43.00’/13.11m
J: 13.15’/4.01m
P: 37.50’/11.43m
E: 12.00’/3.66m
SA (100%): 507.73ft2/47.17m2
BOWSPRIT OPTION (STD):
I: 41.00’/12.50m
J: 13.15’/4.01m
P: 37.00’/11.28m
E: 12.00’/3.66m
SA (100%): 491.58ft2/45.67m2
(photo from Catalina brochure)
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.