Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
A great cruiser with long keel that can handle rough weather.
She is rigged for single-handed sailing with all lines leading to the cockpit. Self tacking and roller furling staysail, roller furling mainsail, and roller furling foresail make sail adjustments smooth.
You can tell this Willard has been well maintained, inside and out. She has everything you need for cruising.
Her interior includes an aft galley, with microwave, propane stove/oven, a double bowl sink, and refrigeration in the icebox.
Moving forward, she includes two settees to port and starboard, with a drop down table to starboard. The hanging locker is to port, just aft of the stateroom, with the head to starboard.
The V-berth in the stateroom looks inviting. The anchor chains are exposed and lead to storage under the V-berth. The stateroom is where you will find a portable air conditioning unit.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
LOA w/bowsprit: 35.16’.
Derived from the Willard 30’ Trawler. Willard Marine built five different versions of their 30 footer: Searcher (fish boat style), Nomad (Sedan), Horizon (motorsailer), Voyager (pilothouse) and Sailboat (cutter rigged). William Crealock was the designer called upon to make the necessary adaptation for the sailing model. The Willard company is still in business (2008) but no longer builds recreational craft.
This listing is presented by PopYachts.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.