Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Pearson 365 Sloop
Standing rigging replaced 2012 (with new mast step)
Repowered 2015 with Beta 38, new Velvet Glide transmission.
Walter V-Drive replaced (factory new) 2018
Shaft, prop, and strut replaced 2019
Bottom taken down to the fiberglass then 2 coats of epoxy, 8 gallons of barrier paint and 3 coats bottom Paint.
Cockpit coaming caps replaced 2017
Cockpit cushions replaced 2018
Interior reupholstered 2018
Equipment: Garmin GPS Standing rigging replaced 2012 (with new mast step) Repowered 2015 with Beta 38, new Velvet Glide transmission. Walter V-Drive replaced (factory new) 2018 Shaft, prop, and strut replaced 2019 Bottom taken down to the fiberglass then 2 coats of epoxy, 8 gallons of barrier paint and 3 coats bottom Paint. Cockpit coaming caps replaced 2017 ACR Global Fix Pro EPIRB Standard Horizon VHF Bimini Equipment: Dometic Cold Machine refrigeration (replaced/new 2015) Sails…Main and genoa both replaced 2016/2018 respectively. Main: loose foot/full batten. 135 Genoa. Battery charger replaced 2019 AmpAir 100 (not currently mounted) Cockpit cushions replaced 2018 Interior reupholstered 2018 Draft: 4.5 ft Displacement: 17,700 Fresh water: 150 gal. Fuel capacity: 50 gal.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Available as sloop, ketch, or cutter.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.