Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
LONESTAR LS 13 SAIL BOAT WITH TRAILER
The Chrysler Lonestar LS 13 Sail Boat is for sale. It is in overall good to excellent condition. Sails are in Very good condition. Hull, Mast & Boom are in great shape. Just needs a little touch paint on the inside. Has pretty much everything you need to get out on the water and sail today. Comes with the trailer. I have the AZ title to the boat and AZ documentation for the trailer. $750 OBO
Sailboat Specifications
Hull Type: Twin Centerboards Rigging Type: Masthead Sloop LOA: 13.08 ft / 3.99 m LWL: 11.50 ft / 3.51 m S.A. (reported): 93.00 ft² / 8.64 m² Beam: 5.08 ft / 1.55 m Displacement: 350.00 lb / 159 kg Max Draft: 3.00 ft / 0.91 m Min Draft: 0.58 ft / 0.18 m Construction: FG First Built: 1963 Builder: Lone Star Boats/ Chrysler Marine (USA) Designer: Thomas Faul & Charles Wittholz
Sailboat Calculations
S.A. / Displ.: 30.00 Disp: / Len: 102.74 Comfort Ratio: 5.18 Capsize Screening Formula: 2.89 Hull Speed: 4.54 kn Pounds/Inch Immersion: 208.74 pounds/inch
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Lone Star Boats was located at:
1001 Inustrial Ave.
Plano TX (USA)
The company was purchased by Chrysler Marine in 1965.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.