Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Cal 24, 1984 sailboat for sale Length 24’ 3” Max. width at beam 8.0’ Draft 4.25’ 3800 lbs, blade keel Total Sail Area 260.6 Sq.’ Mast hgt above DWL 33’ 3” 4 berths, blue cushion fabric like new. Cooler Capacity 12 gallons fresh water capacity 15 gallons Battery running lights knot meter depth finder compass small sink with hand water pump portatoilet Anchor, chain and rode on deck in anchor locker. Whisker pole No Trailer
Sails- full battened main- very good condition - 15 years old? 150 - genoa - unknown 25+? works fine, good shape -130 - “ “ “ “ “ -115- jib - “ “ “ “ -90- J22 jib- very good 15 well very good
Located and sailed in fresh water of Canyon Lake for at least the past 25 years, kept on hydrohoists for most of the past 17 years, used primarily for day round-the buoys club racing and day-sailing. Very stable, comfortable, and easy boat to sail. or phone 210-601-9144
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Shoal Draft version:
Draft= 3.33’/1.01m Bal.=1400 lbs./635kg
This listing is presented by SailingTexas.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.