Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
1991 Hunter 30T is a wing keel sloop sailboat
Yes the boat has a dodger and canvas extension attaches to the bimini.
It is a shoal draft sailboat designed with a shallow draft, meaning the bottom of its hull sits relatively close to the water surface. This means you can explore in shallow waters like bays, rivers, or areas with sandbars.
Headroom of 6’ 5”!
The Hunter 30T is an American sailboat that was first built in 1991. The “T” identifier was a new design with taller headroom in the forward part of the cabin space.
In the main saloon enjoy the comfortable settees and dinette. Convenient galley with full amenities and plenty of storage.
Full berth and head in the aft cabin and V-berth in the bow. Sleeps 4 in total.
A Raymarine autopilot, Axiom 7 chartplotter with fishfinder was added in 2020.
The owners added a new Main and Jib sails in 2021 and added a sine inverter in 2022. Additionally they put in a built-in refrigerator, alcohol stove and oven and new Jabsco pump assembly in 2023.
The batteries, the binnacle (housing for the compass) and an AC unit for the companionway were added in 2023.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Updated version of HUNTER 30-2. ‘T’ shaped cockpit.
This listing is presented by PopYachts.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.