Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
1984 J29. Owner has invested much money over the years, but boat has been stored on land for several years, covered for a good portion of that time. Well cared for but has not been launched or sailed for about 7 years. Cushions and canvas were done in nice dark green right before it was stored. Light cream hull with dark green boot stipe and cove stripe with green bottom. Gel coat is excellent. Boat needs TLC and cleaning but is in excellent shape. This boat has not been beat up racing and was mostly used as a local cruiser. Excellent example of a classic boat. See details below. Coast Guard documented vessel. If you are looking for a J 29, this is your boat. J/29 Hull number 110 from 1984. Fractional Rig. Sails are in good condition. Main, 1,2 and 3 Jibs. 2 spinnakers half and three-quarter oz. Yanmar 1GM10 diesel With at most 25 hrs. It was a new replacement engine, not rebuilt. Two-slot headfoil. Barient self-tailing main winches. Legal modified rudder for more control - Johnstone approved. 7 Brownell stands. Aluminum deck frame for cover. No cover but was covered. Hull frames had been reinforced. Through hull for head removed and professionally glassed over. No sign of hull balsa core wetness. Deck is stiff. Boat comes with all rigging, dock lines, nice dark green sail cover. This boat turns heads when it is rigged and ready. She is a beauty. Boat is in Rhode Island . $9,500
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.