Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
1974 Ericson 37 Flush Deck
IOR design Racer/Cruiser with many updated items. Vessel is turn key and in good working order. Recently raced Regattas in the Abacos. Can also be an amazing liveaboard!
Equipment: Equipment: Yanmar 3gm30f (2021), Pur Power survivor 35 (works well), Standing and running replaced 2018, New Selden hydraulic backstay adjuster 2023, New running backstays Dyneema (2023), Dyneema Life Lines, New freshwater tank 2018, New Jabsco head 2021, New plumbing for head 2021, Dometic 12v fridge/freezer (2018), New thru hulls 2021, New prop shaft 2021, New 3 blade prop 2021, Salt water wash down, 2 anchors, Raymarine auto pilot, Raymarine st60 electronics, Vesper AIS, 580 watts of solar, Victron 100/30, Victron 75/15, 2 -8D AGM batteries for house bank, All lights are L.E.D, Aluminum Arch, Aluminum tiller with battle stick extension.
Sails: New Neil Pryde laminate Mainsail, UK Mylar/Kevlar Genoa 150% (good condition), Dacron Genoa 135%, New UK tape drive staysail Mylar/carbon/kevlar, Lazy jacks/stack pack (Dyneema w/low friction rings)
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.