Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
S2 6.7 22 ft sailboat 1981
This is a beautiful, fast, easy to sail boat which is in very good, ready to sail condition
Equipment: Main and 150% jib 2004, in good condition; main has one reef; CDI FF2 jib furler; Spinnaker; Mainsail cover; Spare mainsail
Standing rigging inspected by Torresen Marine, in 2019 and reported to be in very good condition; Adjustable backstay; Cunningham; Traveler; Boomkicker boom support and boom vang; Harken mainsheet block and cam cleat; Main halyard runs to cockpit through Spinlock clutch on cabin top; Lewmar #16 primary winches with handle and new winch handle pocket; Lewmar #6 halyard winch; Lifting keel with keel winch handle; Rudder rebuilt by Torresen Marine in 2019; Compass; Porta Potty; Cockpit cushions; Cabin V berth and settee cushions; Danforth anchor, chain and rode; VC-17 anti-fouling paint freshly applied in 2021
Suzuki 6 hp 4 cycle outboard - new in 2017, with internal and external gas tanks
E-Z Loader Trailer Tires adequate for short distances. Bearings good. New tail lights. New cable on winch.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
AKA S2 6.7 GRAND SLAM.
Thanks to Bob Proctor for providing updated information for this yacht.
A few boats were turned out with a fixed keel.(draft: 4.5’)
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.