Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

We will occasionally send you relevant updates. You can opt out or contact us any time.
  • 1 / 17
  • 2 / 17
  • 3 / 17
  • 4 / 17
  • 5 / 17
  • 6 / 17
  • 7 / 17
  • 8 / 17
  • 9 / 17
  • 10 / 17
  • 11 / 17
  • 12 / 17
  • 13 / 17
  • 14 / 17
  • 15 / 17
  • 16 / 17
  • 17 / 17

Seller's Description

DISTRESS SALE - $7,500 OBO

CIRCE is a 1970 Red Wing 35 (Hull #21) designed by Cuthbartson & Cassian (C&C) and built by Hinterhoeller Ltd. This model was renamed the C&C 35 MKI when Hinterhoeller merged with C&C.

We have owned CIRCE since 2012 with the intent of sailing and restoring her. In recent years due to health and family reasons, we have not been able to provide the effort necessary to accomplish this. For those reasons we are selling CIRCE.

We are asking $7,500 or best offer for her. CIRCE is being sold as is, where is, for cash.

Equipment: Since 2012 the following upgrades have been accomplished:

CIRCE’s bottom was taken down to fiberglass, blisters repaired and recoated with 2 gallons of Epiglass Epoxy, 4 gallons of Interlux Interprotect Barrier Coat, 2 gallons of Hydrocoat (Red) and 2 gallons of Hydrocoat (Blue). An additional gallon of Hydrocoat (Blue) is applied when hauled.

The Ports at the Vee Berth were replaced.

The glazing in the fixed Salon Ports was replaced and Ports rebedded.

A black water tank and associated piping was added for the head.

The Wind Speed, Apparent Wind, Depth and Knot-meter were recently replaced.

CIRCE is powered with an Atomic 4 engine. Her engine ran well prior to the exhaust pipe rusting out. Have the replacement insulated exhaust ready to be installed.

Initiated Engine Upgrades, the following have been purchased but not installed: Purchased Indigo Electronics Electric Ignition Package. Indigo Electronics Oil Filtration Kit. Moyer Marine Carburetor Rebuild Kit and replacement Choke Cable.

Purchased an Indigo Radial Winglet 3 Bladed prop to replace the 2 bladed folding prop.

CIRCE’s Sail Inventory Includes: Main with reefing points Light Air #1, Heavy Air #1, #2, #3, Stay Sail, 0.5 oz Spinnaker 0.75 oz Spinnaker

You could be sailing CIRCE this season.

MORE PHOTOS AVAIABLE UPON REQUEST

Advertisement

Specs

Designer
C&C Design
Builder
C&C Yachts
Associations
?
# Built
?
Hull
Monohull
Keel
?
Rudder
?
Construction
FG w/balsa deck

Dimensions

Length Overall
35 0 / 10.7 m
Waterline Length
27 5 / 8.4 m
Beam
10 7 / 3.2 m
Draft
6 0 / 1.8 m
Displacement
10,500 lb / 4,763 kg
Ballast
5,000 lb / 2,268 kg (Lead)

Rig and Sails

Type
Sloop
Reported Sail Area
576′² / 53.5 m²
Total Sail Area
576′² / 53.5 m²
Mainsail
Sail Area
257′² / 23.8 m²
P
37 11 / 11.6 m
E
13 5 / 4.1 m
Air Draft
?
Foresail
Sail Area
319′² / 29.6 m²
I
43 11 / 13.4 m
J
14 6 / 4.4 m
Forestay Length
46 3 / 14.1 m

Auxilary Power

Make
Universal
Model
Atomic 4
HP
30
Fuel Type
Gas
Fuel Capacity
20 gal / 76 l
Engine Hours
?

Accomodations

Water Capacity
26 gal / 98 l
Holding Tank Capacity
?
Headroom
?
Cabins
?

Calculations

Hull Speed
8.0 kn
Classic: 7.03 kn

Hull Speed

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Formula

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL

8.03 knots
Classic formula: 7.03 knots
Sail Area/Displacement
19.2
16-20: good performance

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

Formula

SA/D = SA ÷ (D ÷ 64)2/3

  • SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
  • D: Displacement in pounds.
19.22
<16: under powered
16-20: good performance
>20: high performance
Ballast/Displacement
47.6
>40: stiffer, more powerful

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Formula

Ballast / Displacement * 100

47.62
<40: less stiff, less powerful
>40: stiffer, more powerful
Displacement/Length
225.6
200-275: moderate

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

Formula

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

  • D: Displacement of the boat in pounds.
  • LWL: Waterline length in feet
225.57
<100: ultralight
100-200: light
200-300: moderate
300-400: heavy
>400: very heavy
Comfort Ratio
23.6
20-30: coastal cruiser

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Formula

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)

  • D: Displacement of the boat in pounds
  • LWL: Waterline length in feet
  • LOA: Length overall in feet
  • Beam: Width of boat at the widest point in feet
23.55
<20: lightweight racing boat
20-30: coastal cruiser
30-40: moderate bluewater cruising boat
40-50: heavy bluewater boat
>50: extremely heavy bluewater boat
Capsize Screening
1.9
<2.0: better suited for ocean passages

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

Formula

CSV = Beam ÷ ³√(D / 64)

  • Beam: Width of boat at the widest point in feet
  • D: Displacement of the boat in pounds
1.93
<2: better suited for ocean passages
>2: better suited for coastal cruising

Notes

First called the REDWING 35 and built by Hinterhoeller Ltd. a development of the INVADER 35. It was renamed the C&C 35 when Hinterhoeller was merged with C&C Yachts.

In 1973 a re-designed model was introduced, later designated the C&C 35-2. (or Mk II). In all, 351 C&C 35s were built. Production for the C&C 35-2 ended in 1975.

Differences between the 2 versions:
The nearly one foot increase in length of the Mk II is a result of raising the sheer several inches. In addition, the scimitar-shaped rudder of the MkI was replaced with a more conventional, partially balanced spade. The after sections of the MkII were reshaped to reflect the then-current IOR design trends, sail area was increased by a little over 50 square feet and an additional 620 pounds of ballast were added.

The deck and cabin house of the MkII were also modified eliminating the integral spray rail on the cabin top that was a prominent feature on the MkI. The cockpit was changed to a “T” configuration, and a bridge deck added for the mainsheet. The interior was spruced up to make it a little more yacht-like in appearance and, last but not least, all these changes resulted in a 30 % increase in displacement to 13,800 pounds, and draft increased from 5’ 3” to 5’ 6”.

Construction of the 35 is a solid glass hull with balsa cored deck.
The interior is similar between the MKI and MKII models. The galley and navigation station are flip-flopped on the two models with the MKI having a starboard side galley aft and a port side quarter berth/navigation station combination. Both models have a fiberglass cabin sole and minimal bilge area.

The Universal Atomic 4 gas engine was the standard auxiliary power for both models. Some of the later MkII models were offered with Westerbeke diesel engines.

From 1983 to 1987 C&C built another 35 model, referred to here as the C&C 35 MKIII, which is an entirely different design.

This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.

View on SailboatListings.com

Advertisement

Embed

Embed

Embed this page on your own website by copying and pasting this code.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

We will occasionally send you relevant updates. You can opt out or contact us any time.
Measurements:

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.