Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
PRICE REDUCED 2005 MacGregor 26M Sleeps four to six Water ballast Centerboard 1.75 to 5.75 draft 150 Genoa CDI roller furler 50 hp Honda four stroke outboard engine, new impeller, runs great Oxidation removed from all blue and black surfaces and buffed in 2023 All cushions in great shape Trailer with hydraulic brake activator and new winch New tires on trailer V berth and aft berth Mast raising rig with new winch Always in fresh water Selling due to first mate’s bad knees
Equipment: 26M custom tarp cover New rudder lines New mainsheet traveler lines New genoa lines Black bimini VHF radio New carpet New grab handles for companionway New grab handle on cabin cover New rack and pinion steering New custom steering (to disconnect motor from rudders) Digital onboard charters Perko battery selector switch Cobra 1500 watt power inverter Shore power New Garmin ECHOMAP UHD 74Cv, 7” New replacement topping lift kit (not installed) New Harken single line reefing kit (not installed) New custom outhaul kit (not installed) New cabin and starter batteries
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Replaces the MACGREGOR 26X. Twin rudders and rotating spar.
As with the previous model, designed for use with a more than ‘auxilary’ sized outboard. Capable of 22 mph under power. Under sail she can carry an additional 1150 lbs. of water ballast.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.