Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

We will occasionally send you relevant updates. You can opt out or contact us any time.
  • 1 / 5
  • 2 / 5
  • 3 / 5
  • 4 / 5
  • 5 / 5

1973 JJ Taylor & Sons Contessa 26


Seller's Description

Freshwater boat, built by J.J. Taylor & Sons, Toronto. Sailed in Lake Ontario until 2019, when my wife and I bought the Contessa and trailered it to Lake Erie. Designed in England for blue waters, the Contessa 26 is a full-keel masthead sloop displacing 5,400 pounds that handles the sometimes stormy waters of Lake Erie without a problem. With a draft of only 4 feet and a beam of 7.5 feet, the Contessa can be transported without a special permit. Comes with a twin-axle custom trailer. Rocinante, named after Don Quixotes horse, has been well maintained and housed indoors in winters in the four years my wife and I have owned her. Upgrades include new 120% Genoa in 2021, fully battened mainsail with three reefing points and cover in 2022 and standing rigging last year. Our Contessa certainly isn’t perfect. While the deck has no soft spots, there are some spider cracks around the cockpit and some water leaks when it rains. I suspect the safety line stanchions need to be rebedded.

Equipment: – Yanmar 1GM10 diesel – Stearn Dynafurl roller furling system, featuring solid aluminum foil as headstay – Raymarine Dragonfly 4 Pro chart plotter (with depth sounding sensor) – 30 amp, 110v shore power – Two batteries: house and starter, with AC chargers – Contest bulkhead mounted compass – 15-pound Danforth anchor – dodger and canvass side panels

Other improvements include: – replaced anchor light, streaming and running lights with LEDs (2020) – rewired mast with vhf coaxial cable (2020) – masthead mounted Shakespeare 5214 vhf antenna and Davis windvane (2020) – replaced cabin lights and reading lights in V-berth with LEDs (2020) – replaced Whale water pump for sink (2020) – new starter for Yanmar engine (2020) – replaced fuse box with circuit breakers (2020) – new engine mounts for the Yanmar on a re-fiberglassed foundation (2021) – replaced exhaust hose (2021) – new starter for Yanmar (2021) . – new house battery (2021) – refurbished Whale manual bilge pump (2021) – new cutlass bearing (2022) – Garhauer rope boom vang (2022) – replaced bearings in roller furler – Installed triple stopper on boom, Dyneema loops and low-friction rings to improve reefing system (2023) – replaced pump assembly of Jabsco head (2023)


David Sadler
J.J. Taylor and Sons Ltd.
Maclan Marine
Jeremy Rogers Ltd.
Chris Carrington
Contessa 26 Association
Contessa Corner (Contessa 26)
# Built
Transom hung


Length Overall
25 5 / 7.8 m
Waterline Length
20 0 / 6.1 m
7 6 / 2.3 m
4 0 / 1.2 m
5,400 lb / 2,449 kg
2,300 lb / 1,043 kg

Rig and Sails

Reported Sail Area
233′² / 21.7 m²
Total Sail Area
233′² / 21.6 m²
Sail Area
102′² / 9.5 m²
24 0 / 7.3 m
8 5 / 2.6 m
Air Draft
Sail Area
130′² / 12.1 m²
29 0 / 8.8 m
8 11 / 2.7 m
Forestay Length
30 4 / 9.3 m

Auxilary Power

Fuel Type
Fuel Capacity
Engine Hours


Water Capacity
Holding Tank Capacity
5 8 / 1.7 m


Hull Speed
6.3 kn
Classic: 5.99 kn

Hull Speed

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.


Classic hull speed formula:

Hull Speed = 1.34 x √LWL

A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL

6.27 knots
Classic formula: 5.99 knots
Sail Area/Displacement
<16: under powered

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.


SA/D = SA ÷ (D ÷ 64)2/3

  • SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
  • D: Displacement in pounds.
<16: under powered
16-20: good performance
>20: high performance
>40: stiffer, more powerful

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.


Ballast / Displacement * 100

<40: less stiff, less powerful
>40: stiffer, more powerful
275-350: heavy

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.


D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

  • D: Displacement of the boat in pounds.
  • LWL: Waterline length in feet
<100: ultralight
100-200: light
200-300: moderate
300-400: heavy
>400: very heavy
Comfort Ratio
20-30: coastal cruiser

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.


Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)

  • D: Displacement of the boat in pounds
  • LWL: Waterline length in feet
  • LOA: Length overall in feet
  • Beam: Width of boat at the widest point in feet
<20: lightweight racing boat
20-30: coastal cruiser
30-40: moderate bluewater cruising boat
40-50: heavy bluewater boat
>50: extremely heavy bluewater boat
Capsize Screening
<2.0: better suited for ocean passages

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.


CSV = Beam ÷ ³√(D / 64)

  • Beam: Width of boat at the widest point in feet
  • D: Displacement of the boat in pounds
<2: better suited for ocean passages
>2: better suited for coastal cruising



Designed by David Sadler and Jeremy Rodgers in the 1960s, the classic little Contessa 26, like her popular sibling the Contessa 32, is one of the better known and loved British productions yachts, with around 650 cruising the world today. She’s a pretty boat, built from fibreglass, and owes her looks to the Swedish Folkboat whose elegant and seaworthy design influenced so many cruisers of the era. Although not speedy by today’s standards the Contessa was a fast boat for her time and established a reputation as a one-design racer with an active class association.

She’s proven very capable, and despite her size and cramped 5′ 8″ of headroom, her blue water pedigree includes several circumnavigations and a score of Atlantic and Pacific crossings. The Contessa 26 association tells us that those who buy her are traditionalists and keen sailors who appreciate her easy-to-handle and dependable performance.


The Contessa 26 was conceived in 1965 in Lymington, England from a collaboration between Jeremy Rogers and David Sadler over many late night sessions around the Rogers family dinner table. Jeremy Rogers was traditionally a builder of wooden boats and of the classic Swedish Folkboat in particular. David Sadler, one of his Folkboat customers, had the idea of tweaking the Folkboat design to give it a horizontal base to the keel so that it could ‘dry out’ upright, as well as fitting a masthead rig and a large genoa to improve racing performance. Although the design was Sadlers, Rogers has stressed that the Contessa 26 would never have been produced without the financial backing of Vernon Sainsbury of the Sainsbury grocery family who was an avid yachtsman and took a leap of faith in providing the funding for the tooling.

Rogers decided to build his modified Folkboat out of GRP and the Contessa 26 saw his boatyard change over from wood to fibreglass production. Before this Rogers had only used fibreglass for dinghies. The first boat Contessa of Lymington was manufactured and released in 1966 and, along with the next few boats off the line, was an instant hit on the racing circuit. The Contessa’s boat show debut was a tremendous success and her winning formula of good looks, easy handling, seaworthiness and affordability brought the orders rolling in. It didn’t hurt her popularity that the first few boats clocked up a number of early racing successes in both short and long distance events including a Round Britain win by Binkie, the smallest entrant there, and a twenty-fifth placing in the 1972 OSTAR (Observer Single-handed Transatlantic Race) by Shamal. As a nice touch, thanks to the hand they had played in her production, David Sadler and Vernon Sainsbury sailed away in hulls number five and six respectively.

In total the UK production was around 400 boats. Jeremy Rogers’ boatyard built 350 from 1966 until 1977 when the yard decided that these small boats were too labour intensive to be profitable and sold the moulds to Chris Carrington. A few more boats were built  by Carrington before the moulds went to Maclan Marine who produced only a few more in 1977 and 1978. The Roger’s boatyard had also sold a set of moulds in 1969 to J. J. Taylor in Toronto, Canada who produced the Contessa 26 under licence, also making the transition from wooden boats to fibreglass production. The Canadian Contessa 26 had an identical hull but a modified deck moulding with a larger cockpit area, short aft deck and no lazarette. There were also minor differences to the interior layout. Due to problems with the license these boats were renamed the Taylor 26 from 1984 onwards and around 400 boats were produced in total before J.J. Taylor ceased business in 1990.

The two recorded circumnavigations, by Tania Aebi in Varuna (described in her book “Maiden Voyage”) and Brian Caldwell in Mai Miti Vava’u, were both in the Canadian version of the boat and there has been some debate amongst owners over which is the better version, with both camps claiming the superior design but with no hands down winner.

Configuration and Layout

The Contessa is a masthead sloop with a deep keel cut away at the forward end and the horizontal base which allows her to be dried out easily. Like the Folkboat, she has graceful lines, low freeboard and an acutely raked transom with a distinctive rudder shaft mounted to the hull. Her other distinctive feature is the exaggerated ‘hump’ at the aft end of the coach roof and keyhole companionway which replaces the standard sliding companionway hatch. This is a feature more commonly seen on modern offshore racing boats as it makes for a stronger and more waterproof companionway, as well as reducing production costs. However, it means some stooping to get below and with no overhead hatch to let in light, the interior can be dark and a little oppressive. And with only 1.73 metres of headroom below, the stooping doesn’t end at the companionway. Her short waterline and narrow beam results in only four and a half square metres of living space inside, however the cabin feels secure and ‘cocooned’ from the elements which for some is no bad thing.

The good news is that the berths are generous at between 6’3″ to 6’6″ depending on the interior layout so there is plenty of room for lying down. The Contessa 26 was originally offered with a choice of three layouts A, B or C. Layout A featured a twin v-berth with the head inbetween, the cooker and chart table opposite each other amidships and two large quarter berths aft. Layout B featured the galley to port by the companionway, two settee berths in the saloon, the head in its own compartment and a double berth forecabin. Layout C featured a two berth forecabin, the head in a separate compartment to starboard, a hanging locker opposite to port and a gimballed cooker amidships with the chart table opposite and two quarter berths aft.

On deck the 7′ 6″ beam creates some limitations with a small foredeck and narrow side decks, but a raised bulwark offers security when going forward in nasty conditions. There are also plenty of sturdy grabrails and lifelines. The cockpit is small and deep and protected by coamings but can get wet. It has been acknowledged that the cockpit in both versions is too large to be truly bluewater suitable, and in fact the Canadian boat has a larger cockpit than the British, but this fact does not not seem to have held back her owners.

The Canadian version of the 26 used the same British-made hull moulds but with a modified deck mould. In 1983 J.J. Taylor’s Gary Bannister redesigned the deck mould and interior further. Headroom was increased by extending the ‘hump’ above the companionway further into the cabin and a hatch was added amidships for improved light and ventilation. Canadian Boats prior to 1983 had no anchor locker at the bow, cast iron ballast instead of lead, no teak and holly sole, and different positioning of the water and waste tanks.


The Contessa was hand built from fibreglass and the British version has a solid fibreglass deck with no coring, an advantage for older boats as it avoids the risk of core rot commonly found in balsa cored decks of this age. The early J.J. Taylor boats appear to have been built with either a 3/8″ plywood or balsa core. Some flex is apparently noticeable in the foredeck but overall construction is robust. Her mast is stepped on deck and supported from below by a deck beam as well as a main structural bulkhead to prevent compression sagging, another issue common to older boats with deck stepped masts. The first three Contessa 26 built, and many others from the early years, are still going strong, testament to the quality of the fibreglass construction.

Under Sail

As reflected by her racing successes the Contessa’s windward performance is excellent and she is surprisingly fast for her size as well as being responsive and well balanced. Thanks to her small size and rig, the Contessa 26 is easy to handle in just about any conditions, making her popular with single-handers. Her large, transom mounted rudder is also particularly good for self-steering systems. Her narrow beam means that she is tender initially but with half her weight in her keel overall stability is good. ‘Reef early and reef often’ is advice that is given by some Contessa 26 owners although others maintain that this is only the case if using an original oversized (130%) headsail and that she performs admirably under a more modest 100-120% headsail with full main.

Buyer’s Notes

No major flaws have been identified. There are generally several Contessa 26s for sale on the used boat market somewhere in the world at any one time but popularity remains high and is reported to be increasing in the UK thanks to the extremely active class association and the Contessa’s ongoing success on the racing scene. Prices range from 5k-16k UK pounds or up to $18k USD for a used boat. Prospective owners are recommended to contact the Contessa 26 class association in either the US/Canada or the UK (see links below).

Links, References and Further Reading

» Sailing Today ‘What makes the Contessa so special? April 2007 by Peter Poland
» Contessa 26: A tradition in fibreglass by Paul Howard
» The Contessa 26 – A Brief History (Contessa 26 Class Association) by Peter de Jersey
» The Contessa Corner: A site for owner’s, sailors and dreamers (USA and Canada Group Site)
» Jeremy Roger’s Boatyard, UK Contessa 26: Introduction

This listing is presented by Visit their website for more information or to contact the seller.

View on



Embed this page on your own website by copying and pasting this code.

Similar Sailboats For Sale

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

We will occasionally send you relevant updates. You can opt out or contact us any time.

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.