Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
I bought this boat a little over a year ago planning to sail the east coast and Caribbean. I have been living aboard for that time. The boat has everything needed for living aboard and is perfectly capable of sailing around the world.
The center cockpit contains a bucket helm seat on the port side to provide comfort while steering. The floor of the cockpit can be removed to provide full access to the engine directly below. The cockpit is enclosed by a hard top aluminum frame pilot house with fabric side screens. Canvases are included for wet weather or for bug screen in dry weather.
The boat is set up for solo sailing with most lines led back to the cockpit. The head sail and stay sail are on Harken single line drum furlers. The main and mizen sails are also on Harken furlers mounted on custom designed brackets attached to the mast. This greatly simplifies single handed sailing and reefing. The previous owner sailed up and down the east coast and as far as the Dominican Republic in the Caribbean and claimed good offshore performance for this rig.
Equipment: * Engine: 55HP Yanmar 4JH2E 2339 Hours * Water: Three tanks Front-25gal, Rear-60gal, Middle-20gal * Diesel: Two tanks 75gal each * Anchors: Delta Fastset 44lb; CQR 44lb * Pilothouse cockpit with canvas screens * All sails on Harken Roller furlers * Raymarine P70 Autopilot * Raymarine i70 Depth * Digital Yacht AIS * Cobra Marine MRF45-D radio with DSC * Four 100W Solar Panels with MPPT controller * Four Deep Cycle lead acid deep cycle batteries - 467AH * 1000W Jupiter Inverter * Force10 3-burner stove with oven * ICECO JP50 52Qt AC/12V Fridge Freezer * Extra deep sink * SSB Back Stay Antenna with Isolators * TCL Roku 32” TV with LG Blueray player * Smoke & Carbon Monoxide Detector * Emergency Tiller * Head with macerator pump & 5gal holding tank * Hand held Shower with dedicated sump pump * Spares: sails, starter, alternator, pumps, inverter, etc.. * USCG Documented
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
In 1976 the molds were adapted to produce the CABO RICO 38 (aft cockpit).
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.