Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
The owner bought this boat in 1990
General condition and any additional information
Could deliver up to 500 miles if need be.
Standard features
26D MacGregor which has a daggerboard instead of a swing keel. Came with a 150 Genoa and a 90 Jib, a mast raising jack pole and cockpit cushions and a canvas tent cover for standup headroom in the cabin when docked. All interior cushions in good condition including queen berth under cockpit and V berth. We had a family of five and were quite comfortable on this boat. Sailed mostly on local lakes with extended trips to lake Superior and lake Michigan.
Extra gear included
Comes with a 1973 9.5 johnson and a 2003 8.0 merc, a marine radio, a portable head, extra Main sail and heavy air and light air spinakers, sail covers, dock lines, marine battery. Everything needed and more to have a great time sailing.
Improvements to the hull, deck, rigging, engine, or interior
Added Spinaker hardware, SS rear boarding ladder and railings and mast storing pole as well as cockpit speed log/timer and depth finder. Added a traveler and upgraded winches and deck harware for racing in a local yacht club and was very competitive. It is a faster MacGregor.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Modified with centerboard in 1990 (MACGREGOR 26S).
This listing is presented by SailboatOwners.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.