Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
This is an upgraded version of the coveted Tartan 34, the interior is opened to provide maximum cabin space. Recent upgrades include brand new clutches, all new canvas (sail covers, dodger, bimini) and new reefing lines. Teak and Holly floors recently replaced. Refrigerator added for longer cruises. She has been lovingly cared for over the years and makes an outstanding home on the water. Yanmar Diesel with <2500 hours. Autopilot, GPS, Radar, she is sail-away ready!
Equipment: Engine: Yanmar 3GM30F Diesel V berth with forward hatch and storage below Single fold out settee to port with cushion to make an additional sleeping space Single settee to starboard Quarter berth to port with chart table Galley to starboard with sink, 4 burner CNG gas stove stove, refrigerator, water heater and pressure 12volt DC power 2 batteries (starter/house) Shore power 30amp Auto bilge pump 6 manual winches, 4 self-tailing Life jackets, fenders and dock lines Swim ladders Excellent Mainsail 2 excellent forward sails (Jib & Genoa) Roller furling system for jib rigid boom vang Clutches replaced 2022 Datamarine Depth sounder Datamarine Speedometer Raymarine autopilot Garmin Chart Plotter JRC 1500 Radar All canvas replaced 2022 - tan dodger, bimini, & sail covers Magma stainless propane grill
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
The TARTAN 34-2 is updated version of the earlier S&S designed TARTAN 33R with a extended stern and modified interior.
Shoal draft, Sheel keel: 4.46’/1.36m.
Photo courtesy Adam Hunt.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.