Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
1987 S2 9.1 Special Edition for sale. This boat is hull #117 and one of only a handful of special editions that S2 made. The special edition boat came with a vacuum bagged hull and an alternate interior layout, reducing weight by 400 pounds while adding a 9” taller rig.
This particular S2 9.1 SE has been set up well for beercan racing as well as port to port racing. The boat has accommodations for 8 sailors. There is a removable foam cored v berth for extra sleeping arrangements but typically this area is left open as the sail locker. There are two foam and fiberglass coffin berths that were installed last winter. These can be easily removed if the new owner desires to change the layout. When I purchased the boat it had been converted from an outboard boat to an inboard boat very early on in the life of the boat. New martec folding propeller in 2017. In 2019 the engine was replaced with a rebuilt 1992 yanmar 2qm15. During the engine replacement the parts bills started to spiral, it was discovered to have the wrong stuffing box(2” hose clamped around a 1.5” stuffing box) so this was replaced. The control cables were not long enough to reach the new locations, they were replaced. The throttle control itself was damaged while trying to change the cables, that was replaced. The muffler was too small for the new engine, that was replaced. Motor mounts, them too. This list goes on and on.
Now for the fun stuff, the sailing. This boat was set up to be competitive with the more modern boats that are joining my fleet. I have focused on making the boat a competitive racer. This means lines, hardware, and sails. The amount of money spent on new gear is more than the boat is worth. I have purchased a “modern” sport cruiser so time for this girl to move on. Storage can be negotiated as well as the boat stands she is sitting on. She is still shrink wrapped from the winter. Loads of pictures upon request.
Sails:
Older carbon main(from previous owner that I don’t think knew he had a special edition so main is 9” too short)
Older symmetric runner
Older symmetric reacher
2017 Carbon triradial main
2017 Dacron blade 100 w/battens in sausage bag
2018 Carbon double teffetta triradial #2 140 in sausage bag
2019 Carbon laminate #1 155 traditional sail bag
Deck hardware
Harken infinitely adjustable jib cars
Harken 4:1 travellar
Harken 6:1 main sheet
Harken 44 self tailing winches
The rest of the deck hardware is various ages but all is in good working condition.
Running rigging:
Main halyard (oldest line on the boat but still in great condition)
Jib primary 2018 dyneema core
Jib secondary 2018 dyneema core
Spinnaker halyard 2015 dyneema core
Jib sheets 2018 dyneema
Spinnaker sheets 2019 staset
Main sheet 2015
Traveller and jib car adjusters 2017
Back stay 2018
Electronics:
Raymarine tridata
Raymarine wind
Raymarine compass
Extra displays not installed but all wiring and equipment included. Repeaters for Wind, speed, and depth.
Hardwired vhf radio with antenna on mast head
Cd Bluetooth am/fm radio with speakers below and in cockpit. Remote control inc.
Cabin lights with red/white
One battery 2019 one 2016
Electric bilge pump
12v cigarette lighter outlet
Life safety:
4 Coast guard approved life jackets
4 fenders
1 anchor with chain and rhode
1 life sling 2018
1 fire extinguisher
Soft wooden plugs tied to each seacock
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
This listing is presented by SailingAnarchy.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.