Seller's Description
End of season sale. Price will go back up in the Spring if not sold. Don’t miss your chance to enjoy the beautiful fall foliage from the water.
Designed to be sail/power hybrids for use with a more than auxiliary sized outboard and water ballast. Enough power to pull a water skier or go tubing, and pull up on the beach! Enjoy a relaxing sail, or cruise from anchorage to anchorage to find the perfect spot.
Potential to sleep up to 6 people. Fully enclosed head, galley, and dinette in cabin.
Included in the price is an easy load on trailer - tow with standard SUV or pickup.
100% Freshwater boat
All new carbs 2017. New power tilt for motor in 2020. New throttle cable in 2021.
New main and jib 2018, sails were only used 1 season since then. Mostly used motor.
Boat has a 50HP Honda outboard motor (Four Stroke).
The MacGregor 26X has Water Ballast, with Swing Keel and Dual transom-mounted Rudders.
MacGregor EZ step mast can be raised and lowered by one person with gin pole and block and tackle system.
Equipment: Draft: 5.50 feet with centerboard down Beam: 7.82 feet Ballast: 1,500 lbs of water
Sails: - Main - Roller Furling Jib - Spinnaker
Includes: Interior cushions (pics available) Exterior cushions for cockpit (pics available) Built in battery trickle charger with 2 batteries (brand new deep cycle battery) Bimini cover Sail covers BBQ MAGMA grill w/ rail mount CD with AM/FM Radio Fish Finder
Specs
- Designer
- Roger MacGregor
- Builder
- Macgregor Yacht Corp
- Associations
- ?
- # Built
- 5000
- Hull
- Monohull
- Keel
- Centerboard
- Rudder
- ?
- Construction
- FG
Dimensions
- Length Overall
- 25′ 11″ / 7.9 m
- Waterline Length
- 22′ 11″ / 7 m
- Beam
- 7′ 9″ / 2.4 m
- Draft
- 0′ 9″ / 0.2 m — 5′ 6″ / 1.7 m
- Displacement
- 2,250 lb / 1,021 kg
- Ballast
- 1,500 lb / 680 kg
Rig and Sails
- Type
- Sloop
- Reported Sail Area
- 241′² / 22.4 m²
- Total Sail Area
- 241′² / 22.4 m²
Mainsail
- Sail Area
- 130′² / 12.1 m²
- P
- 25′ 0″ / 7.6 m
- E
- 10′ 4″ / 3.2 m
- Air Draft
- ?
Foresail
- Sail Area
- 111′² / 10.3 m²
- I
- 22′ 11″ / 7 m
- J
- 9′ 8″ / 3 m
- Forestay Length
- 24′ 11″ / 7.6 m
Auxilary Power
- Make
- ?
- Model
- ?
- HP
- ?
- Fuel Type
- ?
- Fuel Capacity
- ?
- Engine Hours
- ?
Accomodations
- Water Capacity
- ?
- Holding Tank Capacity
- ?
- Headroom
- ?
- Cabins
- ?
Calculations
- Hull Speed
-
10.0 kn
Classic: 6.43 kn
Hull Speed
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Formula
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
- Sail Area/Displacement
-
22.5
>20: high performance
Sail Area / Displacement Ratio
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
Formula
SA/D = SA ÷ (D ÷ 64)2/3
- SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
- D: Displacement in pounds.
- Ballast/Displacement
-
66.6
>40: stiffer, more powerful
Ballast / Displacement Ratio
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Formula
Ballast / Displacement * 100
- Displacement/Length
-
82.6
<100: Ultralight
Displacement / Length Ratio
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
Formula
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
- D: Displacement of the boat in pounds.
- LWL: Waterline length in feet
- Comfort Ratio
-
9.4
<20: lightweight racing boat
Comfort Ratio
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Formula
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
- D: Displacement of the boat in pounds
- LWL: Waterline length in feet
- LOA: Length overall in feet
- Beam: Width of boat at the widest point in feet
- Capsize Screening
-
2.4
>2.0: better suited for coastal cruising
Capsize Screening Formula
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
Formula
CSV = Beam ÷ ³√(D / 64)
- Beam: Width of boat at the widest point in feet
- D: Displacement of the boat in pounds
Notes
As sail/power ‘hybrids’, both the M and X models are designed for use with a more than ‘auxilary’ sized outboard and water ballast.
The MACGREGOR 26M replaced the MACGREGOR 26X in 2003.
A similar version later reintroduced from another builder as the TATTOO 26 (2013).
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
