Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Sea Pearl 21, 2008 sailboat for sale by Marine Concepts of Tarpon Springs, FL
LOA 21, Minimum draft 6 inches, 6’ beam, 600 lb – Hull #452 Very good to excellent condition located in Saint Joseph, Michigan $11,900 White hull *New White vertical batten sails purchased Oct 2023 from Schurr Sails – little use *Custom sail covers Factory Anchor kit *Rudder Craft foiled rudder *Custom cockpit cushions from CCushions.com (these are closed cell foam) *Electric system with bilge pump and charging stations Aft cockpit Bimini Front cockpit tonneau cover *Front cockpit camping cabin – purchased new May 2023 Factory Boat cover *Custom mizzen sheet led forward on boom Oars Custom motor mount installed at the factory *Honda 2.3, purchased new in September 2023 – very low hours Continental trailer *These items added in 2023 & 2024 have had little use and retail at $5,500. No balsa core in this boat. Water intrusion is a big problem with pre 2004 boats. The balsa core turns to mush and provides no support to the thin fiberglass layers. If you live in cold climates, make sure you consider this when inspecting a used boat. Great value - make your offer. or phone 269-277-one-nine-one-eight
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Based on the Herreshoff ‘Carpenter’ class.
This listing is presented by SailingTexas.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2025 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.