©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
The owner bought this boat in 1985
General condition and any additional information
We need to sell the boat for owners health issues. It runs great.
We just had the boat pulled and had the blisters removed and the bottom painted. We just replaced the Electro Scan in the head.
Reduced price to only $18,000.00
Standard features
Draft - 5’ 04” Beam – 11’ Hull – Fiberglass Fuel – Diesel
Tiller Headroom - 6 feet 2 inches
Extra gear included
New V-Berth sheets and covers •Dishes, etc. upon request •Lots more that only a previously owned boat would have Fairly new inside curtains
Improvements to the hull, deck, rigging, engine, or interior
• New Raritan ElectroScan Waste Treatment System ($2,000) • Recently pulled and new bottom paint ($6,000) • Repowered with Volvo Penta D1-30 • Fortress anchor and removable shank scoop anchor • Radio with AIS receiver • Galley – 2 burner cooktop and 2 cu ft bar refrigerator o Original alcohol stove available upon request o Microwave upon request • TV • Ray Marine auto tiller • Working jib, 150 Genoa, and main sail • Dodger (includes canvas to enclose the cockpit) • New V-Berth sheets and covers • Dishes, etc. upon request • Lots more that only a previously owned boat would have
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Shoal draft: 4.0’.
This listing is presented by SailboatOwners.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.