Seller's Description
A very well-maintained, 1-owner MacGregor 26M. Located in Santa Fe N.M. For those who know the area, are lakes are no longer filling up so the sailing is scarce these days! We will miss it. Boat has all the extra’s factory installed and lots of useful accessories since purchase.
Equipment: MacGregor roller furling system Factory Genoa hardware package Upgraded boom vang Boomkicker Factory mast raising system Factory steering linkage bar Factory marine head Factory cockpit seat cushions (like new) Factory dinette table bunk cushion (like new) Factory boarding and swim ladder stainless steel Kelley Hansen C1000 mainsail excellent condition Kelley Hansen C2000 Genoa with UV cover excellent condition. 18 pedestal wheel upgrade Kelley Hansen lines led aft hardware package Kelley Hansen running rigging package Plastimo bulkhead compass Garmin 420S GPS David inclinometer Cockpit pedestal table custom Stern rail seats Mainsail cover Sunbrella fabric Padded lifeline covers Sunbrella Hatch Holder Sliding hatch grab rail stainless Cabin entry handrails stainless Kenyon marine table top butane stove Teak cabin flooring Shore power, with 12 AMP dual-bank battery charger and GFI. Second battery and Perko switch 12-volt power point for cell phones, etc. Sony Xplode Marine AM/FM CD player and speakers iPod ready. Factory deluxe aluminum trailer with surge brakes Tohatsu 20HP outboard engine package: 4-Stroke, electric start, battery charging Tohatsu pedestal mount remote control
Lots of added accessories: Lines, fenders, snubbers, 5 watt VHF handheld radio, cup holders, UV wheel covers, land anchors (screw) system for anchoring to shore, PFDs, etc.
Specs
- Designer
- Roger MacGregor
- Builder
- Macgregor Yacht Corp
- Associations
- ?
- # Built
- ?
- Hull
- Monohull
- Keel
- Daggerboard
- Rudder
- ?
- Construction
- FG
Dimensions
- Length Overall
- 25′ 11″ / 7.9 m
- Waterline Length
- 23′ 1″ / 7.1 m
- Beam
- 8′ 0″ / 2.4 m
- Draft
- 0′ 11″ / 0.3 m — 0′ 11″ / 0.3 m
- Displacement
- 2,550 lb / 1,157 kg
- Ballast
- 300 lb / 136 kg (Water)
Rig and Sails
- Type
- Sloop
- Reported Sail Area
- 300′² / 27.9 m²
- Total Sail Area
- ?
Mainsail
- Sail Area
- ?
- P
- ?
- E
- ?
- Air Draft
- 35′ 0″ / 10.7 m
Foresail
- Sail Area
- ?
- I
- ?
- J
- ?
- Forestay Length
- ?
Auxilary Power
- Make
- ?
- Model
- ?
- HP
- ?
- Fuel Type
- ?
- Fuel Capacity
- 24 gal / 91 l
- Engine Hours
- ?
Accomodations
- Water Capacity
- 5 gal / 19 l
- Holding Tank Capacity
- ?
- Headroom
- ?
- Cabins
- 1
Calculations
- Hull Speed
-
9.8 kn
Classic: 6.45 kn
Hull Speed
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Formula
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
- Sail Area/Displacement
-
25.7
>20: high performance
Sail Area / Displacement Ratio
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
Formula
SA/D = SA ÷ (D ÷ 64)2/3
- SA: Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
- D: Displacement in pounds.
- Ballast/Displacement
-
11.8
<40: less stiff, less powerful
Ballast / Displacement Ratio
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Formula
Ballast / Displacement * 100
- Displacement/Length
-
91.6
<100: Ultralight
Displacement / Length Ratio
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
Formula
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
- D: Displacement of the boat in pounds.
- LWL: Waterline length in feet
- Comfort Ratio
-
10.7
<20: lightweight racing boat
Comfort Ratio
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Formula
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
- D: Displacement of the boat in pounds
- LWL: Waterline length in feet
- LOA: Length overall in feet
- Beam: Width of boat at the widest point in feet
- Capsize Screening
-
2.3
>2.0: better suited for coastal cruising
Capsize Screening Formula
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
Formula
CSV = Beam ÷ ³√(D / 64)
- Beam: Width of boat at the widest point in feet
- D: Displacement of the boat in pounds
Notes
Replaces the MACGREGOR 26X. Twin rudders and rotating spar.
As with the previous model, designed for use with a more than ‘auxilary’ sized outboard. Capable of 22 mph under power. Under sail she can carry an additional 1150 lbs. of water ballast.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
