Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
Located in Nokomis, Florida, this 41-foot used Morgan 41 Out Island is a great cruising sailboat. Morgan Marine is known for the creation of weekend and vacation cruising vessels. Head out confidently onto the water with a 44hp Yanmar 4JHBE engine on board, in case you need help getting home. This sailboat is in very good condition and systems are working well, according to her owner. The 41 Out Island has lots of space and has the amenities necessary for cruising by a couple or small family. It would even make a nice live aboard! Don’t miss out on your opportunity to own this good condition Morgan cruiser sailboat!…
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
One of the most popular production boats of this size ever built. Nearly half went directly to the charter trade.
This design underwent numerous modification during it’s production life so dimensions, interior layouts and other details vary widely.
Several auxiliary engines were used although the vast majority of boats came with Perkins diesel engines. Early models were powered by Perkins model 4-108 engines or the Westerbeke model 4-107. Morgan switched to Perkins 4-154 model engines later in production. Following Catalina Yacht’s purchase of Morgan Yachts, the OUT ISLAND 41 CLASSIC was produced for several years using a Yanmar diesel engine.
Usually rigged as a sloop or ketch.
A keel/cb model was offered. (Rare)
A few links are provided here to some of the more popular variants.
This listing is presented by PopYachts.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.