Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
1983 Com-Pac 19 sloop in very good condition with trailer and 3.5HP Nissan outboard. New mainsail, older jib and genoa in good shape.
With a full keel, these are very seaworthy, stable, well built boats, perfect for our local bays drawing only 2 feet and without the maintenance and complexity of a retractable centerboard. The 19’ is sought after for being a nice in between size from the more common 16 and 23.
Currently docked in Peconic Bay, happy to show you the boat and go for a sail if desired.
Equipment: Equipment includes: New loose footed mainsail and two foresails (genoa and jib) Trailer in great shape with newer tires, bearing buddys and working lights. Trailer includes removable tongue extension to make launch and retrieval a breeze. 3.5 HP Nissan outboard just serviced this season with new water pump and lower unit oil. Runs great. Cabin cushions. Depth Finder. Custom foiled rudder blade.
Improvements and recent maintenance items:
Hull was soda blasted down to the gelcoat and Interlux barrier coat system applied prior to ablative bottom paint. Fresh coat this season. All deck fittings removed and re-sealed. Hull to deck seam re-sealed with 5200. New breaker panel. Built in depth finder. New mast wiring with LED masthead light. Solar cabin fan Swim platform with retractable ladder on transom.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
A more accurate formula devised by Dave Gerr in The Propeller Handbook replaces the Speed/Length ratio constant of 1.34 with a calculation based on the Displacement/Length ratio.
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio.311
Hull Speed = Max Speed/Length ratio x √LWL
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64)2/3
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam1.33)
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Photo courtesy Adam Hunt.
This listing is presented by SailboatListings.com. Visit their website for more information or to contact the seller.
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.